Detects leaking areas in compressed air and gas systems
Effortless time-saving detection of pressurised leaking areas with success guaranteed
Non-flammable therefore can also be used on systems containers and pipes with flammable gases
Processing temperature: +5°C to +50°C
Freezes at 0°C
Is resistant to frost can be applied again once thawed.When using with systems containing oxygen it must be ensured that these are constantly pressurised during testing. If not low pressure could result in the leak-finding fluid entering the system and reacting with the oxygen. Rinse residual leak-finding fluid out with clear water immediately after testing.Only spray suspected areas lightly; leaks are shown by foam forming